Firwood 680 Chlorinated Rubber Finish

Sheen finish chlorinated rubber paint for long term protection of metal and wood in corrosive atmospheres such as coastal environments, chemical works etc.

Firwood 680 Chlorinated Rubber Finish

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£48.50 each [+VAT]
+ 48 Loyalty Points
Volume discounts available

5+ for £47.00 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A chlorinated rubber paint that combines good chemical and water resistance with a decorative effect. Ideal for use as the top coat in a chemical resistant chlorinated rubber paint system. Produces a sheen finish. For use on surfaces likely to be exposed to weak/medium strength acids and alkalis. Also recommended for applications subject to a chemically laden atmosphere or in a coastal environment. Can be applied to both steel and concrete substrates.

  • Good chemical and water resistance
  • Decorative effect
  • 300 + Colours available
Coverage: Approximately 10m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:
  • Chemical Plants
  • Dairies
  • Coastal Environments
Colours in this range are produced upon receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.

Application Methods: Brush or Roller

Colour Availability:
Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics

Pack Size: 5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC : 30 minutes

Hard Dry@ 20ºC: 1 ½ hour.

Dry Film Thickness: 20 - 30 μ,

Wet Film Thickness: 53 - 80 μ,

Coverage: Approximately 10m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 27ºC

VOC Content (as supplied): Max 500g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 143 Thinners



Directions for use: Ensure the surface to be painted is clean and free from grease, rust or millscale.

Stir well before use.

For non-ferrous metals, a suitable etch primer is required. See Firwood 90 Etch Primer.

Apply by brush or roller. (Not suitable for spray application.

Clean application equipment immediately after use with Firwood 143 Thinners

Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Don't forget...
Firwood 143 Thinners

From £ 17.65

Firwood 191 Chlorinated Rubber High Build Primer

From £ 36.15

Firwood 90 Rapid Dry Chromate Free Etch Primer

From £ 31.65

Firwood 781 High Build Chlorinated Rubber Paint

From £ 67.40

Sign Up for Email Offers
Close Chat Now boldchat