Firwood 2543 Premium Acrylic Matt Emulsion

Tough matt emulsion paint that stands a bit of scrubbing and abrasion. Low odour formulation

Firwood 2543 Premium Acrylic Matt Emulsion

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£23.65 each [+VAT]
+ 23 Loyalty Points
Volume discounts available

5+ for £22.60 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

Firwood 2543 Premium matt emulsion paint has been developed to offer outstanding durability with the added benefit of having no added solvent in the product formulation. The acrylic formula is excellent for painting walls where high traffic is expected for example in stairwells, kitchens and public buildings as well as around the home. Excellent for use on relief wallpapers and direct to suitably prepared walls and ceilings. Previously un-painted plaster should be sealed prior to painting by the application of this paint thinned with water in the ratio of 4 parts paint to 1 part water and allowed to dry .

Standard shade of white is produced without the addition of solvents in the formulation. Tinted shades may contain a small amount of solvent due to their presence in commercially available tinting systems.

  • Outstanding performance in high traffic areas
  • Available in white and 30 + pastel shades
  • Low odour formulation
  • Excellent obliterating properties
Coverage: Approximately 14m² per 1 litre. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Typical Applications:
  • Walls
  • Ceilings
  • Commercial
  • Residential
Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005". EU limit value for this product, (cat A/a): 30g / litre (2010). This product contains zero added VOC as white.

Please refer to Material Safety data Sheet and Technical Information Sheet prior to the use of this product. See download tab.





Application Methods: Conventional Spray, Airless Spray, Roller, Brush, Paintpad

Colour Availability: White and 30+ pastel shades from stock

Pack Size:
5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC : 30 minutes

Hard Dry @ 20ºC: 1 hour

Over Coa t@ 20ºC: After 2 hours (temperature dependent).

Coverage: Approximately 14m² per 1 litre. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: Not applicable

VOC Content (as supplied): White : 0 g / litre subject to product impurities. Tinted shades may contain up to 0.3% VOC expressed as grammes per litre of coating.

Storage: Store in temperature range 5-40ºC

Thinners: Firwood Use clean cold water





Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, etc. Gloss and oil painted surfaces should be washed clean and rubbed down. Powder or flaky surfaces should be primed prior to painting.

On absorbent surfaces, thin the paint with up to 20% clean water for the first coat (avoid over thinning).

Stir well prior to application.

By brush - load generously and avoid over spreading.

By roller - load generously and apply evenly. A deep pile roller should be used on textured surfaces.

Cleaning: Clean application immediately after use. Use clean cold water.



Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Great product
By Harry Lord from Manchester on July 21st 2015
review
Just used this on our offices refurb and the painting contractor thought it was one of the best emulsion paints he has ever used. He said it covered well, had very little odour and gave a great finish on new plaster.
Great product
By Sue from Ambleside on October 2nd 2015
review
Just used this on our cottage at Ambleside. It looks great and was easy to apply. Just a shame for such a good product that Firwood have yet to make it available in a wider range of colours
Sign Up for Email Offers
Close Chat Now boldchat