Performance water borne polyurethane eggshell paint for interior and exterior use. Low odour. Offers the advantages of ease of application, rapid cleaning of application equipment. Flexible coating yet resistant to knocks and scratches.
For application to suitably prepared wood and metal substrates in both exterior and interior applications.
Dries to an eggshell finish
Low solvent content, less than 50g per litre
Excellent flow out of brush marks
Withstands repeated washing
Good opacity and coverage
Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005".
EU limit value for this product (catA/d): 130 g/l 2010
Colours in this range are produced on receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately.
Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Brush. Roller
Colour Availability: Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics
Pack Size: Pack Size : 0.75, & 2.5 litres
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface Dry @ 20ºC : 1 hour
Hard Dry@ 20ºC: 8 hours
Over Coat@ 20ºC: 16 - 24 hours
Dry Film Thickness: 20 - 40 μ,
Wet Film Thickness: 50 - 100 μ,
Coverage: Approximately 15m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Flash Point: Not applicable
VOC Content (as supplied): Max 50g / litre
Storage: Store in temperature range 5-40ºC
Thinners: Clean cold water
Directions for Use: Stir well before use.
Ensure all surfaces are clean, dry
and free from dust, grease, etc.
All surfaces should be suitably
primed and or undercoated. Use Firwood 2645 QD Wood Primer
as the ideal base coat on wood surfaces for Firwood 2642 Water
Borne Decorative Gloss.
Ensure suitable drying conditions exist
for the full duration of the drying time.
Apply one or more coats as
Avoid the inhalation of dust. Wear suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may
contain harmful lead.
Cleaning: Remove excess paint then clean
application equipment after use with tap water before the paint
Please click here to download the Technical Information Sheet PDF.
Please click here to download the Material Safety Data Sheet PDF.