A quick drying, low odour, water borne gloss for use on metal and wood substrates. Is extensively used in dip tanks for coating automotive components but can be sprayed if preferred.Suitable for use as both a spray and dipping paint. Possesses good flow properties and its rapid drying allows coated items to be handled quickly.
Lead free pigmentation
Easy to clean application equipment
Must be thinned for dipping application but can be sprayed as supplied
For industrial use only , not for 2004/42 processes
Please refer to Material Safety data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Conventional spray (use as supplied). Dipping (when thinned to correct viscosity - suggested starting ratio is 3 parts paint to 1 part water).
Colour Availability: Blue, Red Oxide & Black
Pack Size: 5 & 25 litres (dependant on colour)
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 80%.
Surface dry @ 20ºC : 15 minutes
Hard Dry@ 20ºC: Approx 1 hour. Can be force dried @ 55ºC for 20 minutes
Dry Film Thickness: 10 - 25 μ,
Wet Film Thickness: 28 - 70 μ,
Coverage: Approximately 18m² per 1 litre @ 20μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Flash Point: Not applicable
VOC Content (as supplied): Max 100g /
Storage: Store in temperature range 5-40ºC
Thinners: Use clean cold water
Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, rust, etc.
Seal container after use.
Use clean cold water.
Wash application equipment immediately after use.
Please click here to download the Technical Information Sheet PDF.
Please click here to download the Material Safety Data Sheet PDF.