Firwood 2020 High Solids Finishing Gloss

Firwood 2020 High Solids Finishing Gloss

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£26.00 each [+VAT]
+ 26 Loyalty Points
Volume discounts available

10+ for £23.95 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A high solids gloss finish possessing good durability, toughness and abrasion resistance.

Suitable for use as a protective finish in full painting sequence on ferrous metals, timber and other surfaces. Ideal for both internal and external applications for portable plant, machinery and construction equipment. Conforms to DEF STAN 80-54.

Coverage: Approximately 20m² per litre @ 25µ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application

Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005". EU limit value for this product , (cat A/d): 420g / litre (2007) This product containes less than 400g/lt VOC

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.



Application Methods: Conventional Spray, Airless Spray, Hot Spray, Brush

Colour Availability: Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics

Pack Size: 2.5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%

Surface dry @ 20ºC : 2 hours

Hard Dry@ 20ºC: 8 hours. If applying two coats allow 24hrs between coats.

Dry Film Thickness: 20 - 40 μ

Wet Film Thickness: 40 - 80 μ

Coverage: Approximately 20m² per litre @ 25µ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application

Flash Point: 38ºC

VOC Content (as supplied): Max 399g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 114 Low Odour Thinners

Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

Stir well prior to use.

All surfaces should be primed and/or undercoated.

If applying two coats allow 24hrs between coats.

There is a range of suitable colours within the Firwood 2033 High Solids Undercoat range to suit any topcoat.

Finish with coat(s) of Firwood 2020 High Solids Finishing Gloss as required.

Clean application equipment immediately after use with Firwood 114 Low Odour Thinners


Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Don't forget...
Firwood 114 Low Odour Thinners

From £ 17.65

Sign Up for Email Offers
Close Chat Now boldchat