A rapid drying, anti-corrosive coating with a Bronze effect metallic finish. Provides a good even decorative effect on cast metal substrates and ironwork. Suitable for use as a one coat finish on ferrous metal or timber.
Fast drying
Anti-corrosive properties
Good decorative effect
Coverage: Approximately 12.5m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Typical Applications:
Valves
Compliance: For industrial use only , not for 2004/42 processes
Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Conventional Spray, Airless Spray, Hot Spray,
Colour Availability: Copper bronze
Pack Size: 5 litres (dependant on colour)
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC : 5 minutes
Hard Dry@ 20ºC: 45 minutes. Can be force dried @ 65ºC for 15 minutes.
Dry Film Thickness: 20 - 30 μ
Wet Film Thickness: 60 - 85 μ
Coverage: Approximately 12.5m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Flash Point: 24ºC
VOC Content (as supplied): Max 570g / litre
Storage: Store in temperature range 5-40ºC
Thinners: Firwood 113 Thinners
Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc. Thinning should be avoided.
Stir well before and during use
Cleaining: Clean application equipment immediately after use with Firwood 113 Thinners
Please click here to download the Technical Information Sheet PDF.
Please click here to download the Material Safety Data Sheet PDF.
