Firwood 2525 Water Borne Lunar Finish

Water borne micatellic effect finish easily applied by spray. Helps cover up imperfections on painted castings

Firwood 2525 Water Borne Lunar Finish

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£32.35 each [+VAT]
+ 32 Loyalty Points
Volume discounts available

5+ for £31.15 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A fully compliant one coat, water borne, decorative paint that dries to hard random micatallic finish. This unique finish will enhance uneven or cast metal surfaces.

Suitable for surfaces with a less than ideal surface profile such as castings. The micatellic finish is best suited for covering metal imperfections.

  • Water borne
  • One coat application
  • Decorative paint
Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Typical applications:

  • Motors
  • Pumps
  • Valves
  • Decorative Ironwork
Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005".
EU limit value for this product (cat A/d): 130g / litre (2010)

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.



Application Methods: Conventional Spray (paint will require a small amount of thinning with water), Brush.

Colour Availability:
Moondust Silver, Hobby Green, Cosmos Blue, Galaxy Grey, Solar Gold, Sunspot Red, Starfire Gold, Celestial Maroon

Pack Size: 5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 80%.

Surface Dry @ 20ºC : 30 minutes

Hard Dry @ 20ºC: 2 hours. Curing of the paint film will be impaired by condensation, rain or freezing conditions which will detract from the ultimate film performance.

Dry Film Thickness: 15 - 25μ

Wet Film Thickness: 45 -75μ

Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: Not applicable

VOC Content (as supplied): Max 75g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Use clean cold water



Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

Non-ferrous metals should be treated with a suitable etch primer, mordant wash or adhesion primer.

Cleaning: Wash equipment immediately after application with clean cold water.

Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Don't forget...
Firwood 130 Rapid Dry Hammer Finish

From £ 30.10

Sign Up for Email Offers
Close Chat Now boldchat