Firwood 741 Two Pack Acrylic Semi-Gloss

Two pack non isocyanate acrylic semi gloss paint with excellent durability gloss and colour retention

Firwood 741 Two Pack Acrylic Semi-Gloss

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£81.81 each [+VAT]
+ 81 Loyalty Points
Volume discounts available

5+ for £74.25 each [+VAT]
10+ for £66.69 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A blend of acrylic and epoxy resins. This two pack isocyanate free finish is available in an extensive range of lead free shades. Easy to apply using conventional and airless spray systems and is flexible across a wide temperature range. Good resistance to water, chemicals and fuel. Produced as an alternative to two pack polyurethane systems. The ultimate finish for long term durability on agricultural & construction equipment, machinery and vehicles.

  • Fast drying
  • Impact resistant
  • Highly flexible
  • Long pot life
  • Isocyanate free
  • Easily prepared composite pack
  • Excellent solvent & chemical resistance
Coverage: Approximately 19m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:
  • Agricultural & Construction Equipment
  • Commercial Vehicles
  • Plant & Machinery
  • Street Furniture
Compliance: For industrial use only , not for 2004/42 processes

Colours in this range are produced upon receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Conventional Spray, Airless Spray

Colour Availability: Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics

Pack Size: 4.5 litre composite units

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 90%.

Surface Dry @ 20ºC : 15 minutes

Dry to handle @ 20ºC: 2 hours. Full hardness will be achieved after 7 days. Can be force dried @ 120ºC for 10 minutes.

Dry Film Thickness: 15 - 35 μ,

Wet Film Thickness: 35 -80 μ,

Coverage: Approximately 19m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 25ºC

VOC Content (as supplied): Max 565g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 113 Thinners

Pot Life @ 20ºC:: 12 hours when mixed. The times stated show effective life, however, material stays liquid much longer but does not perform satisfactorily. Do not use after stated times. The pot life will be significantly reduced where the mixed paint is used at higher ambient temperatures.

Mixing Ratio: Base : Base: Curing Agent Approx. 4.5:1 by volume

Packaging: 4.5 litre composite units (base component - 3.65 ltrs in 5 ltr tin + curing agent - 0.85 ltr in 1 ltr tin)

Mixing: Mix base paint and curing agent thoroughly prior to application and mix only the paint required for immediate use.

Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

Use Firwood 176 Chromate Free Etch Primer on non-ferrous metals or Firwood 76 Two Pack Epoxy ZincPhosphate Primer on ferrous metals.

Clean application equipment immediately after use with Firwood 113 Thinners.



Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet for the base component PDF.

Please click here to download the Material Safety Data Sheet for the curing agent PDF.

Product Reviews
Don't forget...
Firwood 76 Two Pack Zinc Phosphate Epoxy High Build Primer

From £ 49.70

Firwood 113 Thinners

From £ 17.65

Firwood 740 Two Pack Acrylic Gloss

From £ 79.83

Sign Up for Email Offers
Close Chat Now boldchat