Firwood 701 Fast Dry Semi-Gloss

Fast drying semi gloss finish machinery enamel available in over 300 shades from stock
Firwood 701 Fast Dry Semi-Gloss

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£60.15 each [+VAT]
+ 60 Loyalty Points

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A tough drying semi-gloss machinery enamel paint. A general purpose lead free industrial finishing paint with fast drying properties available in a semi gloss shades including BS 381C, BS 4800 and the German colour standard RAL.Suitable for use as a decorative and protective finish in a full painting sequence on ferrous metals, timber and other surfaces. Ideal for both internal and external use and has achieved widespread acceptance as a good all round maintenance finish for brush application. Suitable for use on metal containers, castings, agricultural and industrial implements, components and machinery, etc. When thoroughly dry, possesses good splash resistance to petrol and oil but is not suitable for permanent immersion.

Also possesses moderate heat resistance and can be force dried.

Can be used as a single coat finish or incorporated into a full painting sequence.

  • Ideal for both internal and external use
  • Fast drying
  • Lead-free
  • 300 + shades including BS 381C, BS 4800 and the German colour standard RAL
Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:

  • Machinery
  • Metal Containers
  • Castings
  • Agricultural Equipment
Compliance: For industrial use only , not for 2004/42 processes Colours in this range are produced upon receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.

Application Methods: Conventional Spray, Airless Spray, Hot Spray, Electrostatic Spray (adjustment may be required) and Brush

Colour Availability: Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics

Pack Size: 5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface Dry @ 20ºC :
20 minutes

Hard Dry@ 20ºC: 4 hours Can be force dried @ 65ºC for 15 minutes

Dry Film Thickness: 15 - 30 μ

Wet Film Thickness: 45 -90 μ

Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 25ºC

VOC Content (as supplied): Max 525g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 113 Thinners


Mixing: Mix thoroughly before use using a wide bladed stirrer.

Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

If required, apply primer such as Firwood 70 Anti-Corrosive Primer and/or undercoat in accordance with our recommendations.
For non-ferrous metals use a suitable etch primer such as Firwood 90 Chromate Free Etch Primer.

Cleaning: Clean application equipment immediately after use with Firwood 113 Thinners.

Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.
Product Reviews
Don't forget...
Firwood 113 Thinners

From £ 17.65

Firwood 70 Anti-Corrosive Chassis Primer

From £ 24.95

Firwood 703 Fast Dry Matt Finish

From £ 63.85

Sign Up for Email Offers
Close Chat Now boldchat