Firwood 700 Fast Dry Gloss

Fast drying full gloss machinery paint available from stock in BS and RAL shades. For spray application, brush small areas only.

Firwood 700 Fast Dry Gloss

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£37.20 each [+VAT]
+ 37 Loyalty Points

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A tough drying full gloss machinery enamel paint. A general purpose lead free industrial finishing paint with fast drying properties available in an extensive range of shades including BS 381C, BS 4800 and the German colour standard RAL.

Suitable for use as a decorative and protective finish in a full painting sequence on ferrous metals, timber and other surfaces. Ideal for both internal and external use and has achieved widespread acceptance as a good all round maintenance finish for brush application. Suitable for use on metal containers, castings, agricultural and industrial implements, components and machinery, etc.

When thoroughly dry, possesses good splash resistance to petrol and oil but is not suitable for permanent immersion.

Also possesses moderate heat resistance and can be force dried.

Can be used as a single coat finish or incorporated into a full painting sequence.

  • Ideal for both internal and external use
  • Fast drying
  • Lead free
  • 300 + shades including BS 381C, BS 4800 and the German colour standard RAL
Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:
  • Machinery
  • Metal Containers
  • Castings
  • Agricultural Equipment
Compliance: For industrial use only , not for 2004/42 processes

Colours in this range are produced upon receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.



Application Methods: Conventional Spray, Airless Spray, Hot Spray, Electrostatic Spray (adjustment may be required) and Brush

Colour Availability:
Full range of BS 4800, BS 381C & RAL shades except fluorescents and metallics

Pack Size: 5 & 20 litres plus pack of 6 x 400 ml aerosols

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC : 20 minutes

Hard Dry@ 20ºC: 4 hours Can be force dried @ 65ºC for 15 minutes

Dry Film Thickness: 15 - 30 μ,

Wet Film Thickness: 45 -90 μ,

Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 25ºC

VOC Content (as supplied): Max 525g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 113 Thinners



Mixing: Mix thoroughly before use using a wide bladed stirrer.

Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc. If required, apply primer such as Firwood 70 Anti-Corrosive Primer and/or undercoat in accordance with our recommendations.

For non-ferrous metals use a suitable etch primer such as Firwood 90 Chromate Free Etch Primer.

Clean application equipment immediately after use with Firwood 113 Thinners.



Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF for the aerosols.

Product Reviews
Great product.
By Mr Thomas from Newtown Powys on February 9th 2015
review
We have been using this for over 10 years on our products with consistently good results. Great gloss and colour matching is consistently good. Lead free as well which is a requirement of many of our industrial customers.
Don't forget...
Firwood 31 Rapid Dry Primer Undercoat

From £ 22.95

Firwood 70 Anti-Corrosive Chassis Primer

From £ 24.95

Firwood 113 Thinners

From £ 17.65

Firwood 701 Fast Dry Semi-Gloss

From £ 60.15

Sign Up for Email Offers
Close Chat Now boldchat