A rapid drying matt finish with high opacity and good durability. Ideal for decorative ironwork.
Suitable for use on ferrous or pre-treated non-ferrous metals. Ideal as an economical single coat finish or as a final coat in a multi-coat paint system. In black, it can be used as a heat resisting coating able to withstand continuous operating temperatures up to 250°C, with a short term max. of 300°C.
Will withstand temperatures up to 250ºC.
Economical single coat finish
A rapid drying
High opacity
Good durability
Coverage: Approximately 12.5m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Typical Applications:
Railings
Fans
Boilers
Ironmongery
Compliance: For industrial use only , not for 2004/42 processes
Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Conventional Spray, Airless Spray, Hot Spray, Brush and Dipping.
Colour Availability: Black, White & Red Oxide
Pack Size: 5 and 20 litres (dependent on colour)
Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.
Surface dry @ 20ºC : 15 minutes
Hard Dry@ 20ºC: 1 hour.
Dry Film Thickness: 15 - 30
Wet Film Thickness: 50 -90 μ
Coverage: Approximately 12.5m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
Flash Point: 25ºC
VOC Content (as supplied): Max 585g / litre
Storage: Store in temperature range 5-40ºC
Thinners: Firwood 113 Thinners
Directions for Use: All surfaces should be clean, dry and free from grease, rust, millscale, etc.
Stir well before use.
Clean application equipment immediately after use with Firwood 113 Thinners
Please click here to download the Technical Information Sheet PDF.
Please click here to download the Material Safety Data Sheet PDF.
Product Reviews
Quick drying
By Donald from Pickering on October 14th 2015
We need a basic matt black finish for automotive parts. This is great, dries quickly to a matt black finish.