Firwood 265 Fast Dry Oil and Petrol Resisting Finishing Gloss

Fast drying full gloss machinery enamel for spray application with good resistance to splashes of petrol and oils

Firwood 265 Fast Dry Oil and Petrol Resisting Finishing Gloss

Step 1. Click on required shade

Step 2. Select Options

£30.50 each [+VAT]
+ 30 Loyalty Points
Volume discounts available

5+ for £29.30 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A tough, fast drying full gloss finishing coat that can be used as a single coat or in a full paint sequence. A good general purpose industrial machinery enamel. Suitable for use on metal containers, machinery, etc. When thoroughly dry, possesses good splash resistance to petrol and oil but is not suitable for permanent immersion. Has moderate heat resistance and can be force dried.

  • Fast drying
  • Full gloss finish
  • Good splash resistance to petrol and oil
Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:

  • Metal Containers
  • Machinery
  • Tubing
  • Agricultural Equipment
Compliance: For industrial use only , not for 2004/42 processes

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.


Application Methods: Conventional Spray, Airless Spray, Hot Spray, Electrostatic Spray (adjustment may be required), Brush (small areas only)

Colour Availability:
Available in over 20 selected shades

Pack Size: 5 & 20 litres (dependent on colour)

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC : 20 minutes

Hard Dry@ 20ºC: 4 hours. Can be force dried @ 65ºC for 15 minutes.

Dry Film Thickness: 15 - 30 μ,

Wet Film Thickness: 45 -90 μ,

Coverage: Approximately 14m² per 1 litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 25ºC

VOC Content (as supplied): Max 550g / litre

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 113 Thinners
Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

As a machinery finish Firwood 265 is often used as a one coat brush or spray finish on clean smooth surfaces.

Where the surface is rough or porous, such as castings, the use of an appropriate primer and undercoat is recommended. Suitable products include; Firwood 1 Fast Dry High Build Zinc Phosphate Primer, Firwood 70 Anti-Corrosive Primer and Firwood 31 Fast Dry Primer/Undercoat.

Stir well before use

Cleaning: Clean application equipment immediately after use with Firwood 113 Thinners
Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Don't forget...
Firwood 31 Rapid Dry Primer Undercoat

From £ 22.95

Firwood 70 Anti-Corrosive Chassis Primer

From £ 24.95

Firwood 113 Thinners

From £ 17.65

Firwood 1 Rapid Dry High Build Zinc Phosphate Primer

From £ 23.75

Sign Up for Email Offers
Close Chat Now boldchat