Firwood 2580 Water Borne Gloss Finish

Full gloss water borne spray applied finish for plant, machinery and general fabrication work

Firwood 2580 Water Borne Gloss Finish

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£43.00 each [+VAT]
+ 43 Loyalty Points
Volume discounts available

5+ for £38.00 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A quick drying, low odour, water borne acrylic gloss for use on metal and wood substrates. Available in both BS 4800 and RAL colour standards. A general purpose industrial water borne finish. Suitable for use as a decorative and protective finish in a full painting sequence on ferrous metals, timber and other surfaces. Ideal for both internal and external use and has achieved widespread acceptance as a good all round maintenance finish for brush application.

  • Low Odour
  • Quick drying
  • Lead free pigmentation
  • Easy to clean application equipment
Coverage: Approximately 12m² per 1 litre @ 20 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:
  • Original Equipment Manufacture
  • Maintenance
Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005". EU limit value for this product (catA/d): 130g / litre (2010) & (Cat A/g): 30g/litre

Colours in this range are produced upon receipt of order and are not accepted for return unless faulty. Where accurate colour matching is required please request a shade card as online colour charts are not always represented accurately. Please refer to Material Safety data Sheet and Technical Information Sheet prior to the use of this product. See download tab.





Application Methods: Conventional or HVLP spray, Closed cell foam roller, Lambswool roller (dampen roller with clean water before use), Brush (synthetic bristle type).

Colour Availability: Available from stock in all BS4800, BS381C and RAL shades.

Pack Size:
5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 80%.

Surface dry @ 20ºC : 30 minutes

Hard Dry @ 20ºC: 1 hour

Over Coat @ 20ºC: 2 - 4 hours (temperature dependent).

Dry Film Thickness: 15 -30 μ,

Wet Film Thickness: 45 - 90 μ,

Coverage: Approximately 12m² per 1 litre @ 20 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: Not applicable

VOC Content (as supplied): Max 30g / litre when mixed

Storage: Store in temperature range 5-40ºC

Thinners: Use clean cold water





Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc.

Stir well before use

Take care to keep a suitable wet edge bearing in mind the fast drying properties of the coating.

Seal container after use. Cleaning: Application equipment should be cleaned immediatley after use with clean cold water.



Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Don't forget...
Firwood 2586 Water Borne Anti-Corrosive Primer

From £ 27.10

Sign Up for Email Offers
Close Chat Now boldchat