Firwood 2040 High Solids Two Pack Acrylic Gloss

Firwood 2040 High Solids Two Pack Acrylic Gloss

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£88.20 each [+VAT]
+ 88 Loyalty Points
Volume discounts available

5+ for £80.55 each [+VAT]
10+ for £72.99 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A two pack high solids isocyanate-free acrylic gloss one coat finish for plant, machinery and structural steel applications. The high build finish can be applied as a single coat reducing application costs and VOC emissions.

The high gloss finish exhibits good opacity, scratch resistance and flexibility. With a pot life of 8 hours repeated mixing during shifts can be avoided. Recommended for use as a single coat finish for application directly to suitably prepared steel substrates. Film thicknesses of 50-100 microns are achievable with a single coat.

  • Fast drying
  • Lower VOC content for PG6/23 applications
  • Impact resistant
  • Highly flexible
  • Good salt spray resistance
  • Excellent solvent & chemical resistance
  • Excellent stacking
  • Easily prepared composite pack
Coverage: Approximately 7m² per 1 litre @ 75 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application

Typical Applications:

  • Plant Machinery
  • Agricultural equipment
  • Structural steel
  • Architectural ironmongery
Compliance: For industrial use only , not for 2004/42 processes

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Airless Spray

Colour Availability: Full range of BS 4800, BS 381C and RAL shades except fluoresecents and metallics.

Pack Size:
4.5 litre composite units

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 90%

Surface Dry @ 20ºC : 20 minutes

Dry to Handle @ 20ºC: 6 hours. Full hardness will be achieved after 7 days. Can be force dried @ 120ºC for 15 minutes

Dry Film Thickness: 50 -100 μ

Wet Film Thickness: 90 - 180 μ

Coverage: Approximately 7m² per 1 litre @ 75 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application

Flash Point: 25ºC

VOC Content (as supplied): Max 393g / litre when mixed

Storage: Store in temperature range 5-40ºC

Thinners: Firwood 113 Thinners

Pot Life @ 20ºC: 8 hours when mixed. The times stated show effective life, however, material stays liquid much longer but does not perform satisfactorily. Do not use after stated times. The pot life will be significantly reduced where the mixed paint is used at higher ambient temperatures.



Packaging: 4.5 litre composite units (base component - 3.75 ltrs in 5 ltr tin + curing agent - 750ml in 750 ml tin)

Mixing Ratio: Base : Base: Curing Agent Approx. 5:1 by volume.

Mixing: Mix base paint and curing agent thoroughly prior to application. Only mix paint required for immediate use and use mixed coating within pot life specified.

Stir well before use. It is advisable to stir the base paint prior to mixing.

Directions for Use: Ensure all surfaces are clean, dry and free from dust, grease, millscale, etc. Use Firwood 76 Two Pack Epoxy Zinc Phosphate Primer on ferrous metals.

Cleaning: Clean application equipment immediately after use with Firwood 113 Thinners
Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet for the base component PDF.

Please click here to download the Material Safety Data Sheet for the curing agent PDF.

Product Reviews
Don't forget...
Firwood 113 Thinners

From £ 17.65

Firwood 76 Two Pack Zinc Phosphate Epoxy High Build Primer

From £ 49.70

Sign Up for Email Offers
Close Chat Now boldchat