Firwood 70 Anti-Corrosive Chassis Primer

Smooth finish anti corrosive primer for automotive components manufacture

Firwood 70 Anti-Corrosive Chassis Primer

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£29.30 each [+VAT]
+ 29 Loyalty Points

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A rapid drying, anti-corrosive primer which gives excellent protection to correctly prepared ferrous and non-ferrous surfaces. This primer has been formulated to meet the rigorous performance requirements of the automotive component and chassis markets.

Suitable for a wide range of general industrial uses where a superior finish and extended durability are required.

Can be used as a chassis and component primer for vehicles, agricultural and construction equipment both for new build and refinishing. As a measure of its quality, this product has been subjected to and passed the stringent test requirements of Leyland Vehicles Material Engineering Specification PP1.

  • Rapid dry
  • Conforms to Leyland Vehicles Material Engineering Spec. PP1

Typical Applications:
  • Automotive Components


Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005”.EU limit value for this product (cat B/c): 540g / litre (2010),

Please refer to Material Safety data Sheet and Technical Information Sheet prior to the use of this product. See download tab.

Application Methods:   Conventional spray, Airless spray and Dipping. Brush small areas only.

Colour Availability:   Red Oxide, Grey, Dark Sea Grey, Black, White & Buff

Pack Size:   5 and 20 litres (dependant on colour)

Drying Time @ 20ºC:   Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 5ºC or relative humidity exceeds 90%.

Surface dry @ 20ºC :   20 minutes

Hard Dry@ 20ºC:   1 hour

Dry Film Thickness:   20 -30 μ

Wet Film Thickness:   50 -75 μ

Coverage:   Approximately 15m² per litre @ 25 μ DFT. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point:  25ºC

VOC Content (as supplied):   Max 530g / litre

Storage:   Store in temperature range 5-30ºC

Thinners:   Firwood 113 Thinners

Directions for Use:    All surfaces should be clean, dry and free from grease, rust, millscale, etc.

For galvanised or non-ferrous metals, we recommend the use of a suitable etch primer such as Firwood 90 Rapid Dry Chromate Free Etch Primer.

The paint should be applied immediately after completion of the cleaning stage to the required dry film thickness.

Clean application equipment immediately after use with Firwood 113 Thinners.

 Please click here to download the Technical Information Sheet PDF.

 Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Sign Up for Email Offers
Close Chat Now boldchat