Firwood 2501 Water Borne Traffic Linemarker

Easily applied water borne line marking paint. Used in food factories and warehouses, Apply by brush or roller

Firwood 2501 Water Borne Traffic Linemarker

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£44.95 each [+VAT]
+ 44 Loyalty Points

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A fast drying, water borne acrylic line marking paint. Quick and easy to apply and produces sharply defined edges. Good resistance to petrol, diesel, oil and water and excellent resistance to tyre pick up.

Suitable for use on both bare and previously painted concrete and asphalt surfaces.

  • Low odour, Solvent and lead free
  • Use as full gloss or anti slip - reduce accidents
  • Suitable for vehicles and fork lifts - hard wearing
  • Good chemical resistance - anti stain & abrasion
  • Adheres to concrete, steel and ceramic tiles - Easy to apply

Typical Applications:
  • Car Parks
  • Factory Floors
  • Warehouses
  • Ports & Harbours


Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005”. EU limit value for this product (catA/i): 140g / litre (2010)

Please refer to Material Safety data Sheet and Technical Information Sheet prior to the use of this product. See download tab.

Application Methods:   Brush, Roller

Colour Availability:   White, Green, Blue, Black & Yellow.

Pack Size:   5 litres

Drying Time @ 20ºC:   Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 85%.

Surface dry @ 20ºC :   30 minutes

Hard Dry@ 20ºC:   1 hour

Over Coat@ 20ºC:   After 24 hours

Stoving Schedule   20 minutes @ 200 - 220ºC

Coverage:   Approximately Rate 110 metres per litre onnon absorbent surfaces @ 50mm line width. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point:  Not applicable

VOC Content (as supplied):   Max 70g / litre when mixed

Storage:   Store in temperature range 5-40ºC

Thinners:   Use clean cold water

Directions for Use

Ensure area to be coated is clean dry and sound. Do not apply to newly laid concrete. On previously unpainted concrete check for laitance and remove prior to coating with line marking paint.

We recommend the use of Firwood 2709 Concrete Etching Fluid for this.

Mask off area to be coated or use a template to get a straight edge. Mix product well before use. Apply by brush or mini roller. Remove masking tape immediately after application.


Clean application equipment with tap water immediately after use and before the coating has dried.

 Please click here to download the Technical Information Sheet PDF.

 Please click here to download the Material Safety Data Sheet PDF.

Product Reviews
Sign Up for Email Offers
Close Chat Now boldchat