Firwood 2210 Two Pack Fast Dry Epoxy Seal

100% solids liquid epoxy floor coating that dries quickly to reduce downtime and provides a durable surface in warehouses and factories

Firwood 2210 Two Pack Fast Dry Epoxy Seal

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£110.00 each [+VAT]
+ 110 Loyalty Points
Volume discounts available

5+ for £104.05 each [+VAT]
10+ for £98.20 each [+VAT]

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

A fast drying one coat solvent free epoxy resin floor paint with a tough, hard wearing sheen finish. Has excellent resistance to water, chemicals and abrasion. Suitable for use on all types of concrete, brick, stone and steel floors. Ideal for use on heavy traffic areas that need to be used again quickly. Will accept light traffic after 5-6 hours and heavy traffic the next day. Drying times will be extended at low temperatures.
  • Low odour, solvent free
  • Rapid curing
  • Hard wearing in industrial and commercial applications
  • Easily applied on suitably prepared substrate
Coverage: Approximately 40m² per 5 litre pack. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical Applications:
  • Factory Floors
  • Warehouses
  • Workshops
  • Showrooms
Slip Resistance (As supplied)Results obtained using BS7976 Four S Pendulum Test:
  • Dry : 70 - Extremely low slip Potential Wet : 15 - High slip potential
Slip Resistance (with the addition of anti-slip Aggregate)Results obtained using BS7976 Four S Pendulum Test:
  • Dry 75 - Extremely low slip potential Wet : 70 - Extremely low slip potential
Compliance: Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005". EU Limit Value for this product (cat.A/j): 500g/l (2010). This product contains max 5 g/l VOC

For more information please also see the Flooring products selection guide located in the download tab.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.



Application Methods: Apply product by brush or roller using a long pile, double arm roller. Do not flood pour paint onto substrate.

Colour Availability: Mid Grey, Medium Green, Yellow, Tile Red, Black & White

Pack Size: 5 litre composite pack

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 85%.

Hard Dry@ 20ºC: 4 -5 hours. Light traffic can be allowed on the coated area after 5-6 hours and normal traffic the next day. Full cure will gradually be achieved up to 7 days following application.

Coverage: Approximately 40m² per 5 litre pack. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: 100ºC

VOC Content (as supplied): VOC Free

Storage: Store in temperature range 5-40ºC

Pot Life @ 20ºC: 30 minutes when mixed. Mix components together only when ready to apply coating. Anti slip aggregate part C should only be added if an anti slip finish is required. The pot life will be significantly reduced where the mixed paint is used at higher ambient temperatures.

Surface Preparation: Refer to the downloadable Technical Information Sheet.

Mixing Ratio: Base : Curing Agent 2.4:1 by volume.

Packaging: Pack Size : 5 litre composite pack consisting of Part A: Base, Part B: Cure, Part C: Anti slip aggregate

Mixing: As the pot life for this product is only 30 mins, the components should only be mixed together when ready to apply the coating. Add Part B - Cure to Part A - Base and mix thoroughly using a wide bladed stirrer. If an anti slip finish is required than add part C (aggregate in bag) to paint. Mix well.

Once mixed leave for 5 minutes then pour into a shallow tray for application.

Directions for Use: This is a fast drying material and consideration should be given to ensure that the product is mixed and applied within the constraints of the product pot life. Best results are obtained in warm (minimum 15°C), dry conditions with a good through draught.

Apply the mixed base paint to the surface using a brush and/or long pile, double arm roller. Apply an even film to acheive consistent gloss levels. Plan the application of the coating to avoid overcoating areas where the coating has already dried hard.

Do not apply or roll out after the 30 minute pot life has expired or colour variances may occur.

If overcoating, re-coat after a minimum of 12 hours and a maximum of 3 days (cured between 10°C and 30°C). If overcoating after 3 days the surface should be treated as a painted surface and the surface should be prepared accordingly.

Cleaning: Application equipment should be safely disposed of after useas the coating will cure on the application equipment.

Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet for the base component PDF.

Please click here to download the Material Safety Data Sheet for the curing agent PDF.

Please click here to download the Flooring products selection guide PDF.
Product Reviews
Don't forget...
Firwood 110 Cleaner and Degreaser

From £ 12.15

Firwood 2200 Heavy Duty Anti-Slip Coating

From £ 90.20

Firwood 2201 Two Pack Epoxy Line Marking Paint Composite Pack

From £ 41.60

Sign Up for Email Offers
Close Chat Now boldchat