Firwood 2505 Water Borne Acrylic Block Paver Seal

    Water borne block paver sealant for use on driveways and paths. Helps seal in the sand between pavers

      Firwood 2505 Water Borne Acrylic Block Paver Seal

      Step 1. Click on required shade

      Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

      Step 2. Select Options

      £21.80 each [+VAT]
      + 21 Loyalty Points
      Volume discounts available

      5+ for £20.60 each [+VAT]

      Add to wishlist

      Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

      Firwood 2505 is a colourless, water borne,block paver seal. It has been designed to seal the gaps between blocks to prevent penetration by contaminants and to improve the aesthetic appearance. Firwood 2505 will also help bind the jointing sand together to prevent erosion and in doing so will help inhibit the growth of moss and weeds.

      Firwood 2505 is formulated for application to bare, unsealed block pavers. It can also be applied to paving slabs and other concrete products.

      • Easy to apply
      • Water borne product
      • Durable finish
      • Helps bind sand between block pavers
      Coverage: Approximately 35m² per 5 litres. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.
      Typical applications:

      • Driveways
      • Paths
      • Patios
      • Parking Areas
      • Shopping Precincts
      Compliance

      Complies with “the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005". EU limit value for this product (cat A/i): 140g / litre (2010)

      For more information please also see the Flooring products selection guide located in the download tab.

      Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.

      Application Methods: Squeegee with rubber blade

      Colour Availability: Clear

      Pack Size: 5 litres

      Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 80%.

      Surface Dry @ 20ºC : 30 minutes

      Hard Dry@ 20ºC: 1 hour

      Coverage: Approximately 35m² per 5 litres. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

      Flash Point: Not applicable

      VOC Content (as supplied): Max 60g / litre

      Storage: Store in temperature range 5-40ºC

      Thinners: Use clean cold water



      Surface Preparation: All surfaces should be clean, dry and free from dirt, grease, oil and previous coatings. Joints should be filled or topped up to the bottom of the chamfer with clean, dry compacted sand to the correct specification.

      Directions for use: This product is opaque on application but clears when dry. Application will result in a slight darkening of the blocks.

      We recommend inconspicuous testing on colour crucial areas.

      Apply only when the blocks, jointing sand and bedding sand are dry and rain is not expected for at least 24 hours. Pour directly from the container or apply with a watering can fitted with a rose. Use a squeegee fitted with a rubber blade to spread out the coating to create an even thin coating.

      Do not flood apply or blooming; a milky white appearance, of the film may occur. Ensure the joints are completely filled with liquid and that the joints and pavers have absorbed as much solution as they can.

      NB: the product must not be allowed to pond on the surface of the pavers or create a surface film. Any unabsorbed material must be removed from the surface. Dry conditions at the time of application are important since damp or rain in contact with uncured Firwood 2505 can cause the product to dry with a milky white “bloom". This effect will be exaggerated if any surplus of solution is not removed from the blocks at the time of application.

      Cleaning: Application equipment should be washed immediately with clean cold water.




      Please click here to download the Technical Information Sheet PDF.

      Please click here to download the Material Safety Data Sheet PDF.

      Please click here to download the Flooring products selection guide PDF.

      Product Reviews
      Good product
      By Luigi Castorana from Truro on July 21st 2015
      review
      I've been under pressure from the wife to re seal the block paver driveway for some time and selected this product based on a friends recommendation. I just power washed the drive and let it dry before applying the seal with an old broom. Looks good and dried quickly.
      Don't forget...
      Double Arm Roller Kit

      From £ 29.64

      Sign Up for Email Offers
      Close Chat Now boldchat