Firwood 2508 Anti-Slip Asphalt Paint

For the painting of walkways in car parks, commercial and factory environments


Firwood 2508 Anti-Slip Asphalt Paint

Step 1. Click on required shade

Actual colors may vary from the color on your screen due to monitor color restrictions. Always use a shade card for colour matching purposes.

Step 2. Select Options

£38.00 each [+VAT]
+ 38 Loyalty Points

Add to wishlist

Professional Users - Please register for a trade account for regular purchases. Click here to apply for an account.

An anti-slip coating for internal and external use on asphalt surfaces. The coating helps seal and protect the surface and permits the identification of areas for walkways, parking bays and storage areas.

Suitable for use on asphalt, tarmac and similar surfaces in light to medium duty applications such as car parks, cycleways and footpaths.

  • Suitable for application to asphalt, tarmac and concrete floors
  • Use for the marking of parking bays, pedestrian walkways etc.
Coverage: Approximately 30m² per 5 litre per coat. Normally 2 coats are required. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Typical applications:

  • Car Parks
  • Walkways
  • Cycle Paths
Slip Resistance. Results obtained using BS7976 Four S Pendulum:

  • Dry : 53.7 - Low slip Potential Wet : 45.8 - High slip potential
Slip Resistance (with the addition of anti-slip Aggregate) Results obtained using BS7976 Four S Pendulum Test:

  • Dry 66 - Extremely low slip potential Wet : 60 - Low slip potential
Compliance: Complies with "the VOC in Paints, Varnishes & Vehicle Refinishing Products Regulations 2005".
EU limit value for this product (cat A/i): 140g / litre (2010)

For more information please also see the Flooring products selection guide located in the download tab.

Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Application Methods: Apply product by brush or double arm roller. Do not flood pour paint onto substrate.

Colour Availability: Mid Grey, Tile Red, Med Green, Coniston Blue, White, Yellow and Black

Pack Size: 5 litres

Drying Time @ 20ºC: Drying times will be extended at low temperatures . Do not apply when ambient temperature falls below 10ºC or relative humidity exceeds 85%.

Surface Dry @ 20ºC : 1 hour

Over Coat @ 20ºC: After 24 hours. Foot traffic can be allowed on the coated area after 12 - 24 hours.

Coverage: Approximately 30m² per 5 litre per coat. Normally 2 coats are required. Coverage can be affected by such variables as type and condition of substrate, type of application equipment and individual method of application.

Flash Point: Not applicable

VOC Content (as supplied): Max 30g / litre when mixed

Storage: Store in temperature range 5-40ºC

Thinners: Use clean cold water
Surface Preparation: Refer to the Product Technical Data Sheet.

Mixing: Mix thoroughly for approx. 5 mins using a wide bladed stirrer. A wooden batten at least 25mm wide is ideal.

Directions for Use: Best results are obtained in warm (minimum 15°C), dry conditions with a good through draught. Apply using a brush and/or long pile, double arm roller. For asphalt surfaces apply as supplied without thinning. Ensure you work the product into all voids around the asphalt aggregate but avoid pooling of the paint in such voids.

On bare concrete floors: It is recommended that the first coat be diluted with up to 20% water by volume prior to application. This will help seal the concrete surface. Once dried, a second coat can be applied at full strength.

On previously painted floors: It is recommended that two thin coats be applied rather than one thick coat. This will prolong the life and performance of the coating.

For wooden flooring: Allow to dry thoroughly before applying a second coat, if required.

Cleaning: Application equipment should be washed immediately after use in clean cold water.
Please click here to download the Technical Information Sheet PDF.

Please click here to download the Material Safety Data Sheet PDF.

Please click here to download the Flooring products selection guide PDF.
Product Reviews
Don't forget...
Firwood 2507 Asphalt Court Paint

From £ 36.50

Sign Up for Email Offers
Close Chat Now boldchat