Mixed Aromatic Hydrocarbons. This thinner is primarily for use with our Firwood two pack epoxy based range of performance coatings.
Customers are advised to refer to the relevant paint Technical Data Sheet for confirmation of the correct thinners for each product. The quantity of thinners required will vary from one product/colour to another and the temperature at which the coating is used. Over thinning of paints will cause runs to appear and reduce the protective properties of the material.
Please refer to Material Safety Data Sheet and Technical Information Sheet prior to the use of this product. See download tab.
Type: Mixed Aromatic Hydrocarbons
Pack Size: 5 litres
Flash Point: 25ºC
Recommended Use: Customers are advised to refer to the relevant paint Technical Data Sheet for confirmation of the correct thinners for each product.
The quantity of thinners required will vary from one product/colour to another and the temperature at which the coating is used.
Over thinning of paints will cause runs to appear and reduce the protective properties of the material.
Paints are typically supplied ready to use and thinners are normally required for the cleaning of application equipment only.
If minor adjustment of the coating is required for application of the product this should not exceed 5-10% by volume.
The use of thinners may compromise the compliance of the coating with EC legislation on the VOC content of paints.
Please click here to download the Technical Information Sheet PDF.
Please click here to download the Material Safety Data Sheet PDF.
